Even when carefully handled, plastic canopies are easily scratched.
The result is a dull finish that detracts from your model's appearance.
Future floor finish is a neat acrylic product that can hide the scratches
and restore that nice clear sheen.
Start with a canopy that's trimmed to its final shape. Then pour Future
into a container large enough to fit the entire piece. Using tweezers,
completely immerse the canopy in the liquid and hold it there for
a few seconds.
Now begin drawing the canopy out very slowly - just millimeters per
second. By going slowly you prevent the formation of bubbles.
Once the piece is out of the liquid set it right-side-up on a paper
towel or rag. Place a box over your canopy to keep dust away as it
dries. After 8 hours the finish should be completely dry, and you
should see a marked improvement. If scratches are still evident, try
applying a second coat.
(SFA thanks Chris Parent for submitting this week's tip) |
