| Detachable
Landing Gear |
| |
Here's
an easy, effective way to increase your models versatility.
A detachable landing gear setup makes some interesting conversions
possible, eases the task of covering the model, and makes model
storage easier!
|
|
 |
|
Here's the basic setup: |
|
- Make "A" from 1/16" ply.
- Make "C" from 1/32" ply.
- Make "B" from strips of balsa thicker than
LG wire.
- Glue "B" to "A" using pre-bent LG
leg as a template.
- Sand "B" to thickness of wire.
- Glue "C" to "B"
- Glue the assembly into the fuselage side.
|
Additional bracing may be
required, depending on the particular structure you place
this assembly into.
|
There are many uses for detachable landing gear. One possibility
is removeable "display-only" gear for those scale
models you prefer to fly "gear-up."
|
|
|
|
Another option: Swap those wheels out with some floats!
|
|
Our thanks to Bill Brown for the source of
this week's tip!
|
|
Got a tip you'd like to share? We could
use your input!
See how you can contribute here.
|
|
|
|
|
|
|
