" My flying experience has taught me the importance
of being able to make stabilizer adjustments, so I made a hinged
stab on this model."
" With the addition of the aluminum cowl, the model
balanced perfectly. To my delight it trimmed out on the
second flight (with about 5 degrees of down-elevator) and
will do gentle left hand circles with only one loop of 3/32"
Tan II. For the record, I will never build a
plane without hinged control surfaces again!"
" For more info, there is a construction thread for this
model in SFA forums - just click here.
If you like you can also email me by clicking here: Todd McFarland"
Would you like to see your model here?
Our readers would love to see it too!
Consider having your own article published in Small Flying
Arts.
You can find more info here.
